EIFS Products

ACCENT BASE COATS

EPS ADHESIVE - (60 lbs)

For adhering foam to wood substrates (Do Not Add Cement)

VISE ADHESIVE - (50 lbs)

Acrylic based used as an adhesive and basecoat in Accent's Wall Systems. (Add Cement)

VISE ADHESIVE PLUS - (50 lbs)

Especially suited for areas of anticipated high moisture such as below grade parapets
Can also be used as a barrier coat to protect against wind-driven rain.    ( Add Cement)

ACCENT BASECOAT BAGS - (50 lbs)

Dry powder material, polymer-modified cement used as an adhesive and basecoat in
Accent's Wall Systems.

ACCENT HARDCOAT GRAY - (50 lbs)

Dry powder material, polymer-modified cement used for application for foam shapes.

HARDCOAT ADMIX - (3.5 Gallon)

Required for Hard Coat System in a ration of 1 pail to 7 bags.

ACCENT FINISHES

ACCENT SMOOTH - (65 Lbs Pail)

ACCENT SAND - (65 Lbs Pail)

ACCENT HEAVY SAND - (65 Lbs Pail)

ACCENT SWIRL - (65 Lbs Pail)

ACCENT HEAVY SWIRL - (65 Lbs Pail)

All ACCENT Finishes are 100% Acrylic-Based, Ready-Mixed, Premium Textured
Wall Coatings for Exterior or Interior Use.

ACCENT ANTIQUE SEALER - (40 Lbs Pail)

100" Acrylic Sealer providing a mottled, antiqued or old world look over ACCENT COATINGS

ACCENT sealer color bottle - (16 Oz.)

STANDARD MESH (4.5 oz 38" x 150' )

STARTER MESH (4.5 oz 9.5" x 150' )

HEAVY DUTY MESH (21 oz 38" x 75' )

HEAVY DUTY MESH (15 oz 38" x 75' )

STANDARD MESH (6 oz 48" x 150' )

ACCENT PIGMENTS

PLT/CSE

EXTERIOR YELLOW

AXX

6/CS

LAMP BLACK

B

6/CS

YELLOW OXIDE

C

6/CS

THALO GREEN

D

6/CS

THALO BLUE

E

6/CS

RED IRON OXIDE

F

6/CS

EXTERIOR RED

R

6/CS

BROWN IRON OXIDE

I

6/CS

MAGENTA

V

6/CS

RAW UMBER

L

6/CS

MEDIUM YELLOW

T

6/CS

WHITE

KX

6/CS

*Color Charts Available - Just Call Us At: 1-800-725-7018

ACCENT STUCCOS

ACCENT ONE COAT STUCCO (80 lbs Sack)

Controlled blend of Portland Cement, fibers and chemical additives. When combined with sand
and water performs like traditional stucco, with enhanced durability and strength.

ACCENT ADMIX 300 (3.5 Gal. Pail)

Mix with ACCENT ONE COAT STUCCO 1 pail to 2 bags. Increases tensile, compressive and flexural
strength of Portland Cement based products. Provides proper curing.

Cement finish for when a Mission or Santa Barbara is specified.

ACCENT STUCCO FINISH (90 lbs Sack)

Cement finish for when a traditional stucco finish is desired.

ACCENT ACRYLIC COATINGS

ACCENT ACRYLIC PAINT  (60 lbs)

100% Acrylic Coating containing the most effective ingredients to combat mold and mildew.

ACCENT TEXTURED PAINT  (50 lbs)

ACCENT ELASTOMERIC PAINT  (50 lbs)

Elastomeric Acrylic-based Coating that weatherproofs and bridges cracks. use it for
protecting vertical concrete, stucco, EIFS, masonry, or previously acrylic-coated surfaces.

ACCENT BASE PRIMER  (55 lbs)

Used for priming prepared concrete, EIFS basecoats, or prior applications of accent coatings.

*Call us for all of your Foam Shapes needs - 1-800-725-7018

ACCENT COLOR BOTTLES

ACCENT COLOR BOTTLE   (4 oz)

For use with all ACCENT Coatings and Finishes.

ACCENT FIBERS

ACCENT BONDERS

ACCENT ACRYLIC BONDER    (5 Gal)

ACCENT PVA BONDER    (5 Gal)

Designed to bond new cementitious products to existing cementitious surfaces

STYROFOAM PRODUCTS - IN STOCK

1/2" ACCENT SPECIAL FOAM BOARD (40 p/ctn 320') 2' x 4'

1-1/2" ACCENT SPECIAL FOAM BOARD (13 p/ctn 104') 2' x 4'

2" ACCENT SPECIAL FOAM BOARD (10 p/ctn 80') 2' x 4'